CENTRIFUGE

TYPE	SIZE OF BASKET	H.P.	M. O. C.	R.P.M.	CLUTCH MODEL	Lid Opening	Brake
Manual Top Discharge	12 " 18 " 24" 36" 48 "	2 2 3 7.5 10	Basket- S. S. 316 Contact Parts S. S. 316 or F.R.P. or Rubber lining.	1440 1250 1000 850 750	MCL 1 MCL 1 MCL 2 MCL 3 MCL 3	Manual	Manual Hand Break
Bag Lifting	24 " 36 " 48 " 60 "	3 7.5 10 10	Basket- S. S. 316 / M.S. with. Rubber Lining Contact Parts S.S. 316	1000 850 750 650	MCL2 MCL2 MCL3 MCL3	Hydraulic	Manual Hand Break
Bottom Discharge	36 " 48 " 60 "	7.5 10 10	Basket - S.S. 316/ M.S. with Rubber lining.	850 750 650	MCL3 MCL3 MCL3	Hydraulic	Hydraulic Foot Operated

Advantages :-

1.        Easy for operating.
2.        Computerised dynamically balanced Baskets.
3.        Extra heavy taper roller bearings for better life.
4.        Forced bearing lubrication.
5.        Mechanical clutch to avoid over loading of Motor , giving trouble free service.
6.        Epoxy painting on M.S. Parts.
7.        3 Point suspension for vibration free operations.

HEAT EXCHANGERS

1. Metallic
     SHELL & TUBE TYPES -
    M. O. C : SS 316, Brass, M. S., Titanium (contact Parts)
    Fabrication standards - TEMA

2.  Non - Metallic
     Impervious Graphite -
     1. Block type with outer shell M.S.
     2. Block type ( rectangular )
     3. Shell & tube type.

Quality Assurance.

1. M.S. shells are fabricated as per ASME Codes table VIII.
2. Material test certificates & stage wise inspection reports are available on request.
3. All welding joints are tested by D. P. test as well as X - ray. welding test as per party's
requirement.
4. Multi pass of process fluid as well as General Fluid possible as per requirements.

REACTOR / STIRRER

1. Fabrication standards : As per ASME Code table VIII.

2. Material of construction & contact parts :
     a.      S.S. 316
     b.      S.S. 304
     c.       S.S. 310
     d.       M.S. & M.S. Rubber lining etc.

3. Heating/Cooling Media :-
    a. M.S. Jacket with helical rings.
    b. Limpet Coils.
    c. Internal Cooling Coils.

4. Agitator :-
     a. Anchor Type
     b. Propeller type.

5. Shaft Sealing :-
a. Stuffing Box Gland Packing with Cooling Jacket.
b. Mechanical Seal with cooling arrangement.

6. Bearing Housing :-
    a. Rigid Extra Heavy Taper Roller Bearings
        Provided for Better life.
    b. Self - Lubrication Provision is made.
    c. Design made properly for easy maintenance.

7. Lanterns :- Rigid Construction for holding Bearing
Housing, Gearbox, Motor.

8. Surface Finish :-
a. S.S. Parts are mirror finished by buffering process.
b. M.S. parts are sand Blasted and Epoxy Painted.

BACK

HOME

PROFILE

CONTACT US

FEEDBACK